When using multiple ST-link programmers on Linux, the default OpenOCD scripts are not sufficient to select different programmer adapters
Articles by Koen Zandberg
- The LM75 is a temperature sensor with an i2c interface. It can be easily attached to a Raspberry Pi. But with the correct device tree snippet, the Linux kernel will pick up the sensors automatically and use the correct kernel module for it. This results in that applications such as lm-sensors can also pick up the temperature sensor.
- A guide to getting 6LoWPAN working on a Raspberry Pi with mrf24j40 modules
Short post about being the first post
Page 1 / 1